Back to Top
Services available for Grade 5 Titanium
Material Details
.040″ Grade 5 Titanium
- Laser Cutting View Specs
| Grade 5( Ti-6Al-4V) Titanium .040" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.040" | 1.016 mm |
| Gauge | N/A | N/A |
| Thickness Tolerance Positive | 0.005" | 0.127 mm |
| Thickness Tolerance Negative | 0.005" | 0.127 mm |
| Mill Finish | N/A | N/A |
| Top/Bottom Finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting Process | Fiber laser | Fiber laser |
| Cut Tolerance +/- | 0.005" | 0.127 mm |
| Flatness Tolerance Before Cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min Part Size | .25″ x .375″ | 6.35 mm x 9.525 mm |
| Max Part Size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min Hole Size | .020″ | 0.508 mm |
| Min Bridge Size | .020″ | 0.508 mm |
| Min Hole to Edge Distance | .020″ | 0.508 mm |
 |
||
| Tab and slot tolerance | .010" | 0.254 mm |
 |
||
| Grade 5 Titanium .040" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% |
| Density | 283.39 lb/ft³ | 283.39 lb/ft³ |
| Heat Treatments Process | N/A | N/A |
| ASTM | B265-20 Gr.5 | B265-20 Gr.5 |
| Tensile Strength (Ultimate) | 134 ksi | 134 ksi |
| Tensile Strength (Yield) | 128 ksi | 128 ksi |
| Shear Strength | 79.8 ksi | 79.8 ksi |
| Shear Modulus | 6.4 ksi | 6.4 ksi |
| Fatigue Strength | 63 ksi | 63 ksi |
| Brinell Hardness | 334 | 334 |
| Elongation at Break | 14% | 14% |
| Elastic Modulus | 16500 ksi | 16500 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 46.5 BTU/h-ft °F | 46.5 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.060″ Grade 5 Titanium
- Laser Cutting View Specs
- Deburring View Specs
| Grade 5( Ti-6Al-4V) Titanium .060" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.060" | 1.524 mm |
| Gauge | N/A | N/A |
| Thickness Tolerance Positive | 0.005" | 0.127 mm |
| Thickness Tolerance Negative | 0.005" | 0.127 mm |
| Mill Finish | N/A | N/A |
| Top/Bottom Finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting Process | Fiber laser | Fiber laser |
| Cut Tolerance +/- | 0.005" | 0.127 mm |
| Flatness Tolerance Before Cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min Part Size | .25″ x .375″ | 6.35 mm x 9.525 mm |
| Max Part Size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min Hole Size | .024″ | 0.6096 mm |
| Min Bridge Size | .022″ | 0.5588 mm |
| Min Hole to Edge Distance | .020″ | 0.508 mm |
|
||
| Tab and slot tolerance | .010" | 0.254 mm |
|
||
| Deburring Specifications | INCH | MM |
| Min Deburring Part Size | 1″ x 5″ | 25.4 X 127 mm |
| Max Deburring Part Size | 24″ x 46″ | 609.6 X 1168.4 mm |
| Grade 5 Titanium .060" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% |
| Density | 283.39 lb/ft^3 | 283.39 lb/ft^3 |
| Heat Treatments Process | N/A | N/A |
| ASTM | B265-20 Gr.5 | B265-20 Gr.5 |
| Tensile Strength (Ultimate) | 134 ksi | 134 ksi |
| Tensile Strength (Yield) | 128 ksi | 128 ksi |
| Shear Strength | 79.8 ksi | 79.8 ksi |
| Shear Modulus | 6.4 ksi | 6.4 ksi |
| Fatigue Strength | 63 ksi | 63 ksi |
| Brinell Hardness | 334 | 334 |
| Elongation at Break | 14% | 14% |
| Elastic Modulus | 16500 ksi | 16500 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 46.5 BTU/h-ft °F | 46.5 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.125″ Grade 5 Titanium
- Laser Cutting View Specs
- Deburring View Specs
- Tumbling View Specs
| Grade 5( Ti-6Al-4V) Titanium .125" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.125" | 3.175 mm |
| Gauge | N/A | N/A |
| Thickness Tolerance Positive | 0.010" | 0.254 mm |
| Thickness Tolerance Negative | 0.010" | 0.254 mm |
| Mill Finish | N/A | N/A |
| Top/Bottom Finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting Process | Fiber laser | Fiber laser |
| Cut Tolerance +/- | 0.005" | 0.127 mm |
| Flatness Tolerance Before Cutting | +/- 0.030 per foot | +/- 0.030 per foot |
| Min Part Size | .25″ x .375″ | 6.35 mm x 9.525 mm |
| Max Part Size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min Hole Size | .040″ | 1.016 mm |
| Min Bridge Size | .030″ | 0.762 mm |
| Min Hole to Edge Distance | .038″ | 0.9652 mm |
|
||
| Tab and slot tolerance | .015" | 0.381 mm |
|
||
| Deburring Specifications | INCH | MM |
| Min Deburring Part Size | 1″ x 3″ | 25.4 mm x 76.2 mm |
| Max Deburring Part Size | 24″ x 46″ | 609.6 mm x 1168.4 mm |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 mm x 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 mm x 177.8 mm |
| Grade 5 Titanium .125" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% |
| Density | 283.39 lb/ft³ | 283.39 lb/ft³ |
| Heat treatments process | N/A | N/A |
| ASTM | B265-20 Gr.5 | B265-20 Gr.5 |
| Tensile Strength (Ultimate) | 134 ksi | 134 ksi |
| Tensile Strength (Yield) | 128 ksi | 128 ksi |
| Shear Strength | 79.8 ksi | 79.8 ksi |
| Shear Modulus | 6.4 ksi | 6.4 ksi |
| Fatigue Strength | 63 ksi | 63 ksi |
| Brinell Hardness | 334 | 334 |
| Elongation at Break | 14% | 14% |
| Elastic Modulus | 16500 ksi | 16500 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 46.5 BTU/h-ft °F | 46.5 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.187″ Grade 5 Titanium
- Laser Cutting View Specs
- Deburring View Specs
- Tumbling View Specs
| Grade 5( Ti-6Al-4V) Titanium .187" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.187" | 4.75 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.045" | 1.143 mm |
| Thickness tolerance negative | 0.010" | 0.254 mm |
| Mill Finish | N/A | N/A |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting Process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min part size | 0.25″ x 0.375″ | 6.35 mm x 9.525 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | 0.075″ | 1.905 mm |
| Min bridge size | 0.094″ | 2.388 mm |
| Min hole to edge distance | 0.056″ | 1.422 mm |
|
||
| Tab and slot tolerance | .020" | 0.508 mm |
|
||
| Deburring Specifications | INCH | MM |
| Min Deburring Part Size | 1" x 3" | 25.4 mm x 76.2 mm |
| Max Deburring Part Size | 24″ x 46″ | 609.6 mm x 1168.4 mm |
| Max Flat Part Size (Tapping) | 36″ x 36″ | 914.4 mm x 914.4 mm |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 mm x 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 mm x 177.8 mm |
| Grade 5 Titanium .187" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% |
| Density | 283.39 lb/ft³ | 283.39 lb/ft³ |
| Heat Treatments Process | N/A | N/A |
| ASTM | B265-20 Gr.5 | B265-20 Gr.5 |
| Tensile Strength (Ultimate) | 134 ksi | 134 ksi |
| Tensile Strength (Yield) | 128 ksi | 128 ksi |
| Shear Strength | 79.8 ksi | 79.8 ksi |
| Shear Modulus | 6.4 ksi | 6.4 ksi |
| Fatigue Strength | 63 ksi | 63 ksi |
| Brinell Hardness | 334 | 334 |
| Elongation at Break | 14% | 14% |
| Elastic Modulus | 16500 ksi | 16500 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 46.5 BTU/h-ft °F | 46.5 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.250″ Grade 5 Titanium
- Laser Cutting View Specs
- Deburring View Specs
- Tumbling View Specs
| Grade 5( Ti-6Al-4V) Titanium .250" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.250" | 6.35 mm |
| Gauge | N/A | N/A |
| Thickness Tolerance Positive | 0.045" | 1.143 mm |
| Thickness Tolerance Negative | 0.045" | 1.143 mm |
| Mill Finish | N/A | N/A |
| Top/Bottom Finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting Process | Fiber laser | Fiber laser |
| Cut Tolerance +/- | 0.005" | 0.127 mm |
| Flatness Tolerance Before Cutting | +/- 0.030 per foot | +/- 0.030 per foot |
| Min Part Size | 0.25″ x 0.375″ | 6.35 mm x 9.525 mm |
| Max Part Size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min Hole Size | 0.100″ | 2.54 mm |
| Min Bridge Size | 0.125″ | 3.175 mm |
| Min Hole to Edge Distance | 0.075″ | 1.905 mm |
|
||
| Tab and slot tolerance | .050" | 1.27 mm |
|
||
| Deburring Specifications | INCH | MM |
| Min Deburring Part Size | 1" x 3" | 25.4 mm x 76.2 mm |
| Max Deburring Part Size | 24″ x 46″ | 609.6 mm x 1168.4 mm |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 mm x 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 mm x 177.8 mm |
| Grade 5 Titanium .250" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% | Titanium (Ti): 87.5 – 91% Aluminum (Al): 5.5 – 6.8% Vanadium (V): 3.5 – 4.5% Iron (Fe): 0 – 0.4% Oxygen (O): 0 – 0.25% Carbon (C): 0 – 0.1% Nickel (Ni): 0 – 0.050% Hydrogen (H): 0 – 0.015% Residuals: 0 – 0.4% |
| Density | 283.39 lb/ft³ | 283.39 lb/ft³ |
| Heat Treatments Process | N/A | N/A |
| ASTM | B265-20 Gr.5 | B265-20 Gr.5 |
| Tensile Strength (Ultimate) | 134 ksi | 134 ksi |
| Tensile Strength (Yield) | 128 ksi | 128 ksi |
| Shear Strength | 79.8 ksi | 79.8 ksi |
| Shear Modulus | 6.4 ksi | 6.4 ksi |
| Fatigue Strength | 63 ksi | 63 ksi |
| Brinell Hardness | 334 | 334 |
| Elongation at Break | 14% | 14% |
| Elastic Modulus | 16500 ksi | 16500 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 46.5 BTU/h-ft °F | 46.5 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login