Back to Top
Services available for Grade 2 Titanium
Material Details
.040″
- Laser Cutting View Specs
- Bending View Specs
| Grade 2 Titanium .040" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.040" | 1.016 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.004" | 0.102 mm |
| Thickness tolerance negative | 0.004" | 0.102 mm |
| Mill Finish | Vacuum annealed | Vacuum annealed |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specifications | INCH | MM |
| Cutting process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/- 0.030 per foot | +/- 0.030 per foot |
| Min part size | 0.25″ x 0.375″ | 6.35 mm x 9.525 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | 0.020″ | 0.508 mm |
| Min bridge size | 0.020″ | 0.508 mm |
| Min hole to edge distance | 0.020″ | 0.508 mm |
 |
||
| Tab and slot tolerance | .010" | 0.254 mm |
 |
||
| Bending Specifications | INCH | MM |
| Min bend part size | 0.375" x 1.5" | 9.525 mm x 38.1 mm |
| Max bending flat part size | 44" x 30" | 1117.6 mm x 762 mm |
| Max bend length | 44" | 1117.6 mm |
| Min flange length (before bend/Flat Pattern) 90° or less (obtuse) | 0.255" | 6.477 mm |
| Min flange length (after bend) 90° or less (obtuse) | 0.295" | 7.493 mm |
| Minimum Length Center of bend line 91-130* (Acute) | 0.281" | 7.137 mm |
| Die width | 0.472" | 11.989 mm |
| Effective bend radius @ 90° | 0.045" | 1.143 mm |
| Max bend angle | 90° | 90° |
| Bend angle tolerance (bend length up to 24″) | +/- 1 degree | +/- 1 degree |
| Bend angle tolerance (bend length over 24″) | +/- 2 degrees | +/- 2 degrees |
| Bend deduction @ 90° | 0.079" | 2.007 mm |
| K Factor | 0.38 | 0.38 |
| Bend relief depth | 0.105" | 2.667 mm |
| Minimum joggle. Bend line to bend line @90° max flange | 0.299" | 7.595 mm |
| Maximum joggle. Bend line to bend line @90° max flange | 3.750" | 95.25 mm |
| Dimple Specifications | INCH | MM |
| Min dimple part size | 1.200" x 5.200" | 30.48 mm x 132.08 mm |
| Max dimple part size | 26" x 56" | 660.4 mm x 1422.4 mm |
| Smallest dimple | 0.500" | 12.7 mm |
| Largest dimple | 3.000" | 76.2 mm |
| Grade 2 Titanium .040" Properties | INCH | MM |
| Material Composition | Titanium (Ti): 98.8 – 100 Oxygen (O): 0 – 0.4 Iron (Fe): 0 – 0.2 Carbon (C): 0 – 0.1 Nickel (Ni): 0 – 0.050 Hydrogen (H): 0 – 0.015 Residuals: 0 – 0.4 | Titanium (Ti): 98.8 – 100 Oxygen (O): 0 – 0.4 Iron (Fe): 0 – 0.2 Carbon (C): 0 – 0.1 Nickel (Ni): 0 – 0.050 Hydrogen (H): 0 – 0.015 Residuals: 0 – 0.4 |
| Density | 283.39 lb/ft^3 | 283.39 lb/ft^3 |
| Heat treatments process | Vacuum annealed | Vacuum annealed |
| ASTM | B265-20 Gr.2 | B265-20 Gr.2 |
| Tensile Strength (Ultimate) | 50 ksi | 50 ksi |
| Tensile Strength (Yield) | 40 ksi | 40 ksi |
| Shear Strength | 30 ksi | 30 ksi |
| Shear Modulus | 11.5 ksi | 11.5 ksi |
| Fatigue Strength | 20 ksi | 20 ksi |
| Brinell Hardness | 70 | 70 |
| Elongation at Break | 20% | 20% |
| Elastic Modulus | 15000 ksi | 15000 ksi |
| Poisson’s Ratio | 0.34 | 0.34 |
| Thermal Conductivity | 10 BTU/h-ft °F | 10 BTU/h-ft °F |
| Melting Point | 3020 °F | 3020 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login