Back to Top
Services available for Gasket Grade Cork
Laser Cutting
Flawlessly crafted products with pristine edges, precise tolerances, and an exceptional finish.
Learn MoreMaterial Details
.063" Gasket Grade Cork
- Laser Cutting View Specs
| Cork/Buna-N, .063" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.063" | 1.6 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.015" | 0.381 mm |
| Thickness tolerance negative | 0.015" | 0.381 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA | USA |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Co2 laser | Co2 laser |
| Cut tolerance +/- | 0.009" | 0.229 mm |
| Flatness tolerance before cutting | N/A | N/A |
| Min part size | 1.00″ x 1.00″ | 25.4 mm x 25.4 mm |
| Max part size | 34″ x 30″ | 863.6 mm x 762 mm |
| Min hole size | .032″ | 0.813 mm |
| Min bridge size | .032″ | 0.813 mm |
| Min hole to edge distance | .019″ | 0.483 mm |
 |
||
| Cork/Buna-N 0.063" Properties | INCH | MM |
| Material Composition | Cork and nitrile rubber | Cork and nitrile rubber |
| Density | 38.1 lb/ft^3 | 38.1 lb/ft^3 |
| ASTM | ASTM F104-88 | ASTM F104-88 |
| Tensile Strength (Yield) | 250 psi | 250 psi |
| Comprehensive (Crushing) Strength | 15 ksi | 15 ksi |
| Shear Modulus | >1.5 ksi | >1.5 ksi |
| Impact Strength (Notched Izod) | 1.4 ft-lb/in | 1.4 ft-lb/in |
| Durometer (Shore A) | 65-75 | 65-75 |
| Elongation at Break | >15% | >15% |
| Elastic Modulus | 2.9 ksi | 2.9 ksi |
| Thermal Conductivity | 0.023 BTU/h-ft °F | 0.023 BTU/h-ft °F |
| Recovery (ASTM F36) Minimum (%) | 76% | 76% |
| Flexibilty (ASTM F147) | 3 Max | 3 Max |
| Fluid Immersion (ASTM F146) 70 hrs at 212?F Oil #1 volume increase | -5 to 10% | -5 to 10% |
| Fluid Immersion (ASTM F146) 70 hrs at 212?F Oil #3 volume increase | 15 to 50% | 15 to 50% |
| Thickness Increase (ASTM F146) Fuel A at room temperature | 0 to 15% | 0 to 15% |
| Compression Set B ASTM D395) 25% deflection, 22 hrs at 158°F | 80% | 80% |
| Dielectri Strength (Breakdown Potential) | 0.059 V/mil | 0.059 V/mil |
| Temperature Range | -40° to 300° F | -40° to 300° F |
| Magnetic | No | No |
| Does it Rust | No | No |
.125" Gasket Grade Cork
- Laser Cutting View Specs
| Cork/Buna-N, .125" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.125" | 3.175 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.015" | 0.381 mm |
| Thickness tolerance negative | 0.015" | 0.381 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA | USA |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Co2 laser | Co2 laser |
| Cut tolerance +/- | 0.009" | 0.229 mm |
| Flatness tolerance before cutting | N/A | N/A |
| Min part size | 1.00″ x 2.00″ | 25.4 mm x 2.00 mm |
| Max part size | 34″ x 30″ | 863.6 mm x 762 mm |
| Min hole size | .063″ | 1.6 mm |
| Min bridge size | .063″ | 1.6 mm |
| Min hole to edge distance | .038″ | 0.965 mm |
|
||
| Cork/Buna-N 0.125" Properties | INCH | MM |
| Material Composition | Cork and nitrile rubber | Cork and nitrile rubber |
| Density | 38.1 lb/ft^3 | 38.1 lb/ft^3 |
| ASTM | ASTM F104-88 | ASTM F104-88 |
| Tensile Strength (Yield) | 250 psi | 250 psi |
| Comprehensive (Crushing) Strength | 1.5 ksi | 1.5 ksi |
| Shear Modulus | >1.5 ksi | >1.5 ksi |
| Impact Strength (Notched Izod) | 1.4 ft-lb/in | 1.4 ft-lb/in |
| Durometer (Shore A) | 65-75 | 65-75 |
| Elongation at Break | >15% | >15% |
| Elastic Modulus | 2.9 ksi | 2.9 ksi |
| Poisson’s Ratio | 0.33 | 0.33 |
| Thermal Conductivity | 0.023 BTU/h-ft °F | 0.023 BTU/h-ft °F |
| Recovery (ASTM F36) Minimum (%) | 76% | 76% |
| Flexibilty (ASTM F147) | 3 Max | 3 Max |
| Fluid Immersion (ASTM F146) 70 hrs at 212?F Oil #1 volume increase | -5 to 10% | -5 to 10% |
| Fluid Immersion (ASTM F146) 70 hrs at 212?F Oil #3 volume increase | 15 to 50% | 15 to 50% |
| Thickness Increase (ASTM F146) Fuel A at room temperature | 0 to 15% | 0 to 15% |
| Compression Set B ASTM D395) 25% deflection, 22 hrs at 158°F | 80% | 80% |
| Dielectri Strength (Breakdown Potential) | 0.059 V/mil | 0.059 V/mil |
| Temperature Range | -40° to 300° F | -40° to 300° F |
| Magnetic | No | No |
| Does it Rust | No | No |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login