Back to Top
Services available for ACM
CNC Routing
CNC routing is perfect for cutting a wide variety of composites, acrylics, and wood.
Learn MoreMaterial Details
.118" ACM Panel
- CNC Routing View Specs
| ACM Panel .118" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.118" | 3 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.030" | 0.762 mm |
| Thickness tolerance negative | 0.030" | 0.762 mm |
| Top/Bottom finish | Black/White: Identical both sides Brushed: Single-sided (dull bottom) |
Black/White: Identical both sides Brushed: Single-sided (dull bottom) |
| Sourced from | Global | Global |
| CNC Cutting Specification | INCH | MM |
| Cutting process | CNC Router | CNC Router |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.063 per foot | +/-1.6 per foot |
| Min part size | 1.00″ x 2.00″ | 25.4 mm x 50.8 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .125″ | 3.175 mm |
| Min bridge size | .118″ | 2.997 mm |
| Min hole to edge distance | .035″ | 0.889 mm |
 |
||
| Tab and slot tolerance | .015" | 0.381 mm |
 |
||
| ACM Panel 0.118" Properties | INCH | MM |
| Material Composition | 1100-H16/H18 Aluminum Outer, Extruded solid polyethylene | 1100-H16/H18 Aluminum Outer, Extruded solid polyethylene |
| Density | 73.220 lb/ft^3 | 73.220 lb/ft^3 |
| Heat treatments process | N/A | N/A |
| ASTM | N/A | N/A |
| Thermal expansion | 2.4mm/m @100°C Temp Difference | 2.4mm/m @100°C Temp Difference |
| Impact Strength (kg/cm) | 42 | 42 |
| Peel Strength | >5 Newton/mm | >5 Newton/mm |
| Aluminum Thickness | Where applicable as specified in EN485-4; otherwise ± 0.02 | Where applicable as specified in EN485-4; otherwise ± 0.02 |
| Paint Thickness (micron) | 20 | 20 |
| Pencil Hardness | >HB | >HB |
| Toughness of Coating | 3T | 3T |
| Temperature Resistance | – 50°C to + 80°C/-58F to 176F | – 50°C to + 80°C/-58F to 176F |
| Boiling Water Resistance | Boiling for 2hrs without change | Boiling for 2hrs without change |
| Acid Resistance | Immerse Surface in 2% HC1 for 24Hrs without change | Immerse Surface in 2% HC1 for 24Hrs without change |
| Alkali Resistance | Immersed surface in 2% NaOH for 24Hrs without change | Immersed surface in 2% NaOH for 24Hrs without change |
| Oil Resistance | Immerse Surface in 20# engine oil for 24Hrs without change | Immerse Surface in 20# engine oil for 24Hrs without change |
| Solvent Resistance | Cleaned 100 times with Dimethylbenzene without change | Cleaned 100 times with Dimethylbenzene without change |
| Continuous Service Temp (Operating) | 150 °F | 150 °F |
| Cleaning Resistance | >1000 times without change | >1000 times without change |
| Sound Absorption NRC | 0.05 | 0.05 |
| Sound Attenuation Rwdb | 24 | 24 |
| Water absorption % by volume | 0.01 | 0.01 |
| Thermal Performance R Values | 0.0057 | 0.0057 |
| Magnetic | No | No |
| Does it Rust | No | No |
.236" ACM Panel
- CNC Routing View Specs
| ACM Panel .236" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.236" | 5.994 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.008" | 0.203 mm |
| Thickness tolerance negative | 0.008" | 0.203 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | Global | Global |
| CNC Cutting Specification | INCH | MM |
| Cutting process | CNC Router | CNC Router |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.063 per foot | +/-1.6 mm per foot |
| Min part size | 1.00″ x 2.00″ | 25.4 mm x 50.8 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .125″ | 3.175 mm |
| Min bridge size | .236″ | 5.994 mm |
| Min hole to edge distance | .071″ | 1.803 mm |
|
||
| Tab and slot tolerance | .015" | 0.381 mm |
|
||
| ACM Panel 0.118" Properties | INCH | MM |
| Material Composition | 1100-H16/H18 Aluminum Outer, Extruded solid polyethylene | 1100-H16/H18 Aluminum Outer, Extruded solid polyethylene |
| Density | 73.220 lb/ft^3 | 73.220 lb/ft^3 |
| Heat treatments process | N/A | N/A |
| ASTM | N/A | N/A |
| Thermal expansion | 2.4mm/m @100°C Temp Difference | 2.4mm/m @100°C Temp Difference |
| Impact Strength (kg/cm) | 42 | 42 |
| Peel Strength | >5 Newton/mm | >5 Newton/mm |
| Aluminum Thickness | Where applicable as specified in EN485-4; otherwise ± 0.02 | Where applicable as specified in EN485-4; otherwise ± 0.02 |
| Paint Thickness (micron) | 20 | 20 |
| Pencil Hardness | >HB | >HB |
| Toughness of Coating | 3T | 3T |
| Temperature Resistance | – 50°C to + 80°C/-58F to 176F | – 50°C to + 80°C/-58F to 176F |
| Boiling Water Resistance | Boiling for 2hrs without change | Boiling for 2hrs without change |
| Acid Resistance | Immerse Surface in 2% HC1 for 24Hrs without change | Immerse Surface in 2% HC1 for 24Hrs without change |
| Alkali Resistance | Immersed surface in 2% NaOH for 24Hrs without change | Immersed surface in 2% NaOH for 24Hrs without change |
| Oil Resistance | Immerse Surface in 20# engine oil for 24Hrs without change | Immerse Surface in 20# engine oil for 24Hrs without change |
| Solvent Resistance | Cleaned 100 times with Dimethylbenzene without change | Cleaned 100 times with Dimethylbenzene without change |
| Continuous Service Temp (Operating) | 150 °F | 150 °F |
| Cleaning Resistance | >1000 times without change | >1000 times without change |
| Sound Absorption NRC | 0.05 | 0.05 |
| Sound Attenuation Rwdb | 24 | 24 |
| Water absorption % by volume | 0.01 | 0.01 |
| Thermal Performance R Values | 0.0057 | 0.0057 |
| Magnetic | No | No |
| Does it Rust | No | No |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login