Back to Top
Services available for 7075 T6 Aluminum
Hardware Insertion
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Learn More
Anodizing
We offer Class II anodizing services to add durability and character to your laser cut parts.
Learn More
Tapping
Quickly and easily add threading to allow for the addition of hardware to your parts.
Learn More
Powder Coating
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors.
Learn More
Material Details
.125" 7075 T6 Aluminum
- Laser Cutting View Specs
- Tumbling View Specs
- Countersinking View Specs
- Deburring View Specs
- Powder Coating View Specs
- Anodizing View Specs
- Hardware View Specs
- Tapping View Specs
| 7075 T6 Aluminum .125" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.125" | 3.175 mm |
| Gauge | 8 | 8 |
| Thickness tolerance positive | 0.004" | 0.102 mm |
| Thickness tolerance negative | 0.004" | 0.102 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min part size | .25″ x .375″ | 6.35 x 9.525 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .050″ | 1.27 mm |
| Min bridge size | .063″ | 1.6 mm |
| Min hole to edge distance | .038 | 0.965 mm |
 |
||
| Tab and slot tolerance | .010" | 0.254 mm |
 |
||
| Anodizing Specifications | INCH | MM |
| Min anodizing part size | 1″ x 3″ | 25.4 X 76.2 mm |
| Max anodizing part size | 23" x 23" | 584.2 X 584.2 mm |
| Countersink Specifications | INCH | MM |
| Min countersink part size | 1" x 4" | 25.4 x 101.6 mm |
| Max countersink part size | 14″ x 46″ | 355.6 x 1168.4 mm |
| Countersink Min Minor | .099" | 2.515 mm |
| Countersink Max Major | .427″ | 10.846 mm |
| Countersink Min Hole Center to Material Edge | .361" | 9.169 mm |
| Deburring Specifications | INCH | MM |
| Min deburring part size | 1″ x 3″ | 25.4 X 76.2 mm |
| Max deburring part size | 24" x 46" | 609.6 X 1168.4 mm |
| Hardware Specifications | INCH | MM |
| Min hardware part size | 1″ x 1.5″ | 25.4 x 38.1 mm |
| Max hardware part size | 36″ x 46″ | 914.4 x 1168.4 mm |
| Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | N/A | N/A |
| Max 4 sided box flange height (hardware | N/A | N/A |
| Hardware specific specifications | Please view our Hardware Catalog | Please view our Hardware Catalog |
| Powder Coating Specifications | INCH | MM |
| Min powder coating part size | 1″ x 3″ | 25.4 X 76.2 mm |
| Max powder coating part size | 23" x 23" | 584.2 X 584.2 mm |
| Tapping Specifications | INCH | MM |
| Largest Tap | M10 x 1.5 | M10 x 1.5 |
| Smallest Tap | M2 x 0.4 | M2 x 0.4 |
| Min Flat Part Size Tapping | 0.949" x 1.5" | 24.1046 X 38.1 mm |
| Max Flat Part Size Tapping | 36" x 46" | 914.4 X 1168.4 mm |
| Tapping Min Hole to Edge | 0.063" | 1.6002 mm |
| Tapping Min Hole Center to Material Edge | Tap hole size/2 +0.063" | Tap hole size/2 +1.6 mm" |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 X 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 X 177.8 mm |
| 7075 T6 Aluminum .125" Properties | INCH | MM |
| Material Composition | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 |
| Density | 176.26 lb/ft^3 | 176.26 lb/ft^3 |
| Heat treatments process | T6 | T6 |
| ASTM | B209-21 | B209-21 |
| Tensile Strength (Ultimate) | 81 ksi | 81 ksi |
| Tensile Strength (Yield) | 69 ksi | 69 ksi |
| Shear Strength | 48 ksi | 48 ksi |
| Shear Modulus | 3800 ksi | 3800 ksi |
| Fatigue Strength | 23 ksi | 23 ksi |
| Brinell Hardness | 150 | 150 |
| Elongation at Break | 7.90% | 7.90% |
| Elastic Modulus | 10000 ksi | 10000 ksi |
| Poisson’s Ratio | 0.32 | 0.32 |
| Thermal Conductivity | 134 BTU/h-ft °F | 134 BTU/h-ft °F |
| Melting Point | 890 °F | 890 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.190" 7075 T6 Aluminum
- Laser Cutting View Specs
- Tumbling View Specs
- Countersinking View Specs
- Deburring View Specs
- Powder Coating View Specs
- Anodizing View Specs
- Hardware View Specs
- Tapping View Specs
| 7075 T6 Aluminum .190" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.190" | 4.826 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.007" | 0.178 mm |
| Thickness tolerance negative | 0.007" | 0.178 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min part size | .500″ x .500″ | 12.7 mm x 12.7 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .076″ | 1.93 mm |
| Min bridge size | .095″ | 2.413 mm |
| Min hole to edge distance | .057 | 1.448 mm |
|
||
| Tab and slot tolerance | .015" | 0.381 mm |
|
||
| Anodizing Specifications | INCH | MM |
| Min anodizing part size | 1″ x 3″ | 25.4 x 76.2 mm |
| Max anodizing part size | 23" x 23" | 584.2 x 584.2 mm |
| Countersink Specifications | INCH | MM |
| Min countersink part size | 1" x 4" | 25.4 x 101.6 mm |
| Max countersink part size | 14″ x 46″ | 355.6 x 1168.4 mm |
| Countersink Min Minor | .099" | 2.515 mm |
| Countersink Max Major | .531″ | 13.487 mm |
| Countersink Min Hole Center to Material Edge | .391" | 9.931 |
| Deburring Specifications | INCH | MM |
| Min deburring part size | 1" x 3" | 25.4 x 76.2 mm |
| Max deburring part size | 24″ x 46″ | 609.6 x 1168.4 mm |
| Hardware Specifications | INCH | MM |
| Min hardware part size | 1″ x 1.5″ | 25.4 x 38.1 mm |
| Max hardware part size | 36″ x 46″ | 914.4 x 1168.4 mm |
| Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | N/A | N/A |
| Max 4 sided box flange height (hardware) | N/A | N/A |
| Hardware specific specifications | Please view our Hardware Catalog | Please view our Hardware Catalog |
| Powder Coating Specifications | INCH | MM |
| Min powder coating part size | 1" x 3" | 25.4 x 76.2 mm |
| Max powder coating part size | 23" x 23" | 584.2 x 584.2 mm |
| Tapping Specifications | INCH | MM |
| Largest Tap | 1/2/2020 | 1/2/2020 |
| Smallest Tap | Apr-40 | Apr-40 |
| Min Flat Part Size Tapping | 0.949" x 1.5" | 24.1046 x 38.1 mm |
| Max Flat Part Size Tapping | 36" x 46" | 914.4 x 1168.4 mm |
| Tapping Min Hole to Edge | 0.095" | 2.413 mm |
| Tapping Min Hole Center to Material Edge | Tap hole size/2 +0.095" | Tap hole size/2 +2.413 mm" |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 x 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 x 177.8 mm |
| 7075 T6 Aluminum .190" Properties | INCH | MM |
| Material Composition | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 |
| Density | 176.26 lb/ft^3 | 176.26 lb/ft^3 |
| Heat treatments process | T6 | T6 |
| ASTM | B209-21 | B209-21 |
| Tensile Strength (Ultimate) | 81 ksi | 81 ksi |
| Tensile Strength (Yield) | 69 ksi | 69 ksi |
| Shear Strength | 48 ksi | 48 ksi |
| Shear Modulus | 3800 ksi | 3800 ksi |
| Fatigue Strength | 23 ksi | 23 ksi |
| Brinell Hardness | 150 | 150 |
| Elongation at Break | 7.90% | 7.90% |
| Elastic Modulus | 10000 ksi | 10000 ksi |
| Poisson’s Ratio | 0.32 | 0.32 |
| Thermal Conductivity | 134 BTU/h-ft °F | 134 BTU/h-ft °F |
| Melting Point | 890 °F | 890 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
.250" 7075 T6 Aluminum
- Laser Cutting View Specs
- Tumbling View Specs
- Countersinking View Specs
- Deburring View Specs
- Powder Coating View Specs
- Anodizing View Specs
- Hardware View Specs
- Tapping View Specs
| 7075 T6 Aluminum .250" General Details | INCH | MM |
|---|---|---|
| Advertised Thickness | 0.250" | 6.35 mm |
| Gauge | N/A | N/A |
| Thickness tolerance positive | 0.012" | 0.305 mm |
| Thickness tolerance negative | 0.012" | 0.305 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA/Global | USA/Global |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Flatness tolerance before cutting | +/-0.030 per foot | +/-0.030 per foot |
| Min part size | .500″ x .750″ | 12.7 mm x 19.05 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .100″ | 2.54 mm |
| Min bridge size | .125″ | 3.175 mm |
| Min hole to edge distance | .075 | 1.905 mm |
|
||
| Tab and slot tolerance | .020" | 0.508 mm |
|
||
| Anodizing Specifications | INCH | MM |
| Min anodizing part size | 1″ x 3″ | 25.4 x 76.2 mm |
| Max anodizing part size | 23" x 23" | 584.2 x 584.2 mm |
| Countersink Specifications | INCH | MM |
| Min countersink part size | 1" x 4" | 25.4 x 101.6 mm |
| Max countersink part size | 14″ x 46″ | 355.6 x 1168.4 mm |
| Countersink Min Minor | .130" | 3.302 mm |
| Countersink Max Major | .453" | 11.506 mm |
| Countersink Min Hole Center to Material Edge | .339" | 8.611 mm |
| Deburring Specifications | INCH | MM |
| Min deburring part size | 1" x 3" | 25.4 x 76.2 mm |
| Max deburring part size | 24″ x 46″ | 609.6 x 1168.4 mm |
| Hardware Specifications | INCH | MM |
| Min hardware part size | 1″ x 1.5″ | 25.4 x 38.1 mm |
| Max hardware part size | 36″ x 46″ | 914.4 x 1168.4 mm |
| Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | N/A | N/A |
| Max 4 sided box flange height (hardware) | N/A | N/A |
| Hardware specific specifications | Please view our Hardware Catalog | Please view our Hardware Catalog |
| Powder Coating Specifications | INCH | MM |
| Min powder coating part size | 1" x 3" | 25.4 x 76.2 mm |
| Max powder coating part size | 23" x 23" | 584.2 x 584.2 mm |
| Tapping Specifications | INCH | MM |
| Largest Tap | 1/2/2020 | 1/2/2020 |
| Smallest Tap | Apr-40 | Apr-40 |
| Min Flat Part Size Tapping | 0.949" x 1.5" | 24.1046 x 38.1 mm |
| Max Flat Part Size Tapping | 36" x 46" | 914.4 x 1168.4 mm |
| Tapping Min Hole to Edge | 0.125" | 3.175 mm |
| Tapping Min Hole Center to Material Edge | Tap hole size/2 +0.125" | Tap hole size/2 +3.175" |
| Tumble Specifications | INCH | MM |
| Min Part Size Tumbling | 0.5″ x 1.5″ | 12.7 x 38.1 mm |
| Max Part Size Tumbling | 4″ x 7″ | 101.6 x 177.8 mm |
| 7075 T6 Aluminum .250" Properties | INCH | MM |
| Material Composition | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 | Aluminum (Al): 86.9 – 91.4 Zinc (Zn): 5.1 – 6.1 Magnesium (Mg): 2.1 – 2.9 Copper (Cu): 1.2 – 2.0 Iron (Fe): 0 – 0.5 Chromium (Cr): 0.18 – 0.28 Silicon (Si): 0 – 0.4 Manganese (Mn): 0 – 0.3 Zirconium (Zr): 0 – 0.25 Titanium (Ti): 0 – 0.2 Residuals: 0 – 0.15 |
| Density | 176.26 lb/ft^3 | 176.26 lb/ft^3 |
| Heat treatments process | T6 | T6 |
| ASTM | B209-21 | B209-21 |
| Tensile Strength (Ultimate) | 81 ksi | 81 ksi |
| Tensile Strength (Yield) | 69 ksi | 69 ksi |
| Shear Strength | 48 ksi | 48 ksi |
| Shear Modulus | 3800 ksi | 3800 ksi |
| Fatigue Strength | 23 ksi | 23 ksi |
| Brinell Hardness | 150 | 150 |
| Elongation at Break | 7.90% | 7.90% |
| Elastic Modulus | 10000 ksi | 10000 ksi |
| Poisson’s Ratio | 0.32 | 0.32 |
| Thermal Conductivity | 134 BTU/h-ft °F | 134 BTU/h-ft °F |
| Melting Point | 890 °F | 890 °F |
| Magnetic | No | No |
| Does it Rust | No | No |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login