Back to Top
Services available for 2024 T3 Aluminum
Laser Cutting
Flawlessly crafted products with pristine edges, precise tolerances, and an exceptional finish.
Learn More
Material Details
.025" 2024 T3 Aluminum
- Laser Cutting View Specs
- Bending View Specs
| 2024 T3 Aluminum .025" General Details | INCH | MM |
|---|---|---|
| Gauge | 24 | 24 |
| Thickness tolerance positive | 0.003" | 0.076 mm |
| Thickness tolerance negative | 0.003" | 0.076 mm |
| Top/Bottom finish | Identical both sides | Identical both sides |
| Sourced from | USA | USA |
| Laser Cutting Specification | INCH | MM |
| Cutting process | Fiber laser | Fiber laser |
| Cut tolerance +/- | 0.005" | 0.127 mm |
| Min part size | .25″ x .375″ | 6.35 x 9.5 mm |
| Max part size | 44″ x 30″ | 1117.6 mm x 762 mm |
| Min hole size | .015″ | 0.38 mm |
| Min bridge size | .015″ | 0.38 mm |
| Min hole to edge distance | .008 | 0.2 mm |
 |
||
| Tab and slot tolerance | .010" | 0.254 mm |
 |
||
| Bending Specifications | INCH | MM |
| Min Bend Part Size | 44″ x 30″ | 1117.6 x 762 mm |
| Max Bend Length | 44″ | 1117.6mm |
| Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .255″ | 6.48mm |
| Min Flange Length (After Bend) 90° or less (obtuse) | .282" | 7.67mm |
| Die Width | .472″ | 12.0mm |
| Effective Bend Radius @ 90° | .070″ | 1.78mm |
| Max Bend Angle | 130° | 130° |
| Bend Deduction @ 90° | .0535″ | 1.36mm |
| K Factor | 0.36 | 0.36 |
| Minimum Joggle BL2BL @90 Max Flange | .283″ | 7.2mm |
| Maximum Joggle @90 Max Flange | 3.750″ | 95.25mm |
| Bend Relief Depth | .115″ | 2.92mm |
| 2024 T3 Aluminum .025" Properties | INCH | MM |
| Density | 190 lb/ft^3 | 190 lb/ft^3 |
| Material Composition | Aluminum (Al): 90.7 – 94.7 Copper (Cu): 3.8 – 4.9 Magnesium (Mg): 1.2 – 1.8 Manganese (Mn): 0.3 – 0.9 Silicon (Si): 0 – 0.5 Iron (Fe): 0 – 0.5 Zinc (Zn): 0 – 0.25 Zirconium (Zr): 0 – 0.2 Titanium (Ti): 0 – 0.15 Chromium (Cr): 0 – 0.1 Residuals: 0 – 0.15 | Aluminum (Al): 90.7 – 94.7 Copper (Cu): 3.8 – 4.9 Magnesium (Mg): 1.2 – 1.8 Manganese (Mn): 0.3 – 0.9 Silicon (Si): 0 – 0.5 Iron (Fe): 0 – 0.5 Zinc (Zn): 0 – 0.25 Zirconium (Zr): 0 – 0.2 Titanium (Ti): 0 – 0.15 Chromium (Cr): 0 – 0.1 Residuals: 0 – 0.15 |
| Tensile Strength (Ultimate) | 69 ksi | 69 ksi |
| Tensile Strength (Yield) | 47 ksi | 47 ksi |
| Shear Strength | 41 ksi | 41 ksi |
| Shear Modulus | 3900 ksi | 3900 ksi |
| Fatigue Strength | 20 ksi | 20 ksi |
| Brinell Hardness | 120 | 120 |
| Elongation at Break | 15% | 15% |
| Elastic Modulus | 10000 ksi | 10000 ksi |
| Poisson’s Ratio | 0.33 | 0.33 |
| Thermal Conductivity | 70 BTU/h-ft °F | 70 BTU/h-ft °F |
| Melting Point | 930 °F | 930 °F |
| Magnetic | Yes | Yes |
Frequently Asked Questions
What are the standard production times?
Your estimated shipping date is dynamically calculated in your shopping cart as you add parts and services. Generally, production times for standard orders, excluding additional services such as bending or finishing, range from 2-4 business days prior to shipping.
What is your cut tolerance?
The cut tolerance varies by material and is influenced by both the cutting processused and the material's thickness. For detailed tolerance information for each material,please visit our Materials Library. Select the material you are interested in, navigate to the Material Details section, choose your desired thickness, and review the specific tolerance data provided.
How can I get a discount on my order?
Discounts based on quantity are automatically calculated during the quoting process. As you add parts to your cart, you'll notice discounts of 20% or more when you order two or more identical parts in most materials. For even more substantial savings, consider signing up for our mailing list to receive notifications about exclusive, limited-time offers!
What are the order limits for the number of parts?
At our facility, we accept orders ranging from a single piece . With no minimum order requirement, you can request precisely the number of parts your project requires.
Why am I unable to select a material for my project?
If you're unable to select a material for your part, it's often due to the part size being either too large or too small for the available materials. Please verify that your design file is set up at a 1:1 scale and is in either inches or millimeters. After uploading your file, also ensure that the correct unit of measurement is selected to match your design specifications.
Validate your login